Table of Contents
Check engine light after oil change. When you take your car in for an oil change, the last thing you expect is for the check engine light to turn on. But this is what happened to one of our customers after they had their oil changed at our shop. Keep reading to find out what might have caused the light and how we helped our customer get it fixed.
What Does the Check Engine Light Mean?
After you change your car’s oil, the check engine light may come on. This is because the oil change can disturb sensors in the engine, causing the check engine light to activate. However, this does not necessarily mean that there is a problem with your car. The check engine light may go off after a few driving cycles as the sensors adjust. If the check engine light remains on, however, it indicates that there may be a problem with your car’s emission control system and you should have it checked by a mechanic.
How Does the Check Engine Light Look?
The check engine light may come on for a number of reasons. It could be something as simple as a loose gas cap, or it could be something more serious like an engine misfire. If you’ve just had your oil changed, the check engine light may come on due to a loose oil filter or oil level sensor. In any case, it’s important to have the engine light checked out by a professional to determine the cause.
Why Is the Check Engine Light on After an Oil Change?
A check engine light can indicate a variety of different issues with your vehicle, many of which are not related to the oil change itself. However, one potential reason for the check engine light to come on after an oil change is if the oil filter was not properly installed or seated. If this is the case, the check engine light will usually turn off once the filter is replaced. Another possibility is that the oil level is too low. This can trigger the check engine light, as well as cause damage to your engine. Make sure to check your oil level regularly and top it off as needed.
Other Reasons Why Your Check Engine Light Turns On After an Oil Change
Aside from a loose gas cap, there are several other reasons why your check engine light may turn on after you’ve had your oil changed.
One possibility is that the new oil filter isn’t properly seated. This can cause an oil leak, which will trigger the check engine light.
Another possibility is that the oil change was done incorrectly and too much or too little oil was used. This can also cause an oil leak and trigger the check engine light.
If you’re having this problem, take your car back to the place where you had your oil changed and have them check it out. In most cases, they should be able to fix the problem at no charge.
If you’re the do-it-yourself type, then you can check the oil filter and make sure it’s properly seated and doesn’t have any leaks. You can also check your oil level to see if it’s too high or too low. If it’s too low, add more oil until it reaches the proper level.
In either case, once you’ve fixed the problem, the check engine light should turn off on its own after a few driving cycles. If it doesn’t, then there may be another issue that needs to be addressed.
How Do You Fix the Problem?
If you see your check engine light come on after an oil change, there are a few things you can do to fix the problem. First, check your oil level and make sure that it is full. If it is low, add more oil and check the light again. If the light is still on, there may be a problem with your oil filter. Try changing the filter and checking the light again. If the light is still on, there may be a problem with your engine itself and you should take it to a mechanic for further diagnosis.
How to Reset the Check Engine Light After an Oil Change?
The check engine light is an indication that something is wrong with your car. It can be a simple issue, such as a loose gas cap, or it could be something more serious, such as a faulty oxygen sensor. If you have recently changed your car’s oil, and the check engine light has come on, there are a few things you can do to reset it.
First, check the oil level and make sure that it is full. If it is not, add oil until it reaches the full mark. Next, locate the reset button for the check engine light. This is usually located under the hood, near the battery. Once you have found the button, press and hold it for about 5 seconds. The check engine light should now be reset and should not come on again unless there is another problem.
If the check engine light does come back on, or if it doesn’t reset after you’ve followed these steps, it’s important to take your car to a mechanic to have it checked out. There could be a more serious problem that needs to be addressed.
Should You DIY or Use a Mechanic?
If you’re someone who likes to work on their own car and enjoys doing things themselves, then you may be wondering if it’s okay to change your own oil. The answer is yes, but there are a few things you should know before attempting it.
First, check your vehicle’s owner’s manual. It will have specific instructions on what type of oil to use and how often to change it. Failure to follow these directions could void your warranty or cause damage to your engine.
Next, make sure you have the proper tools and supplies before beginning. You will need an oil filter wrench, a drain pan, a funnel, and of course, fresh oil. Once you have everything you need, find a level spot to park your car on so it doesn’t tip while you’re working.
Now you’re ready to begin. Start by warming up your engine for a few minutes to help the oil flow more easily. Then, use the oil filter wrench to remove the old filter and install the new one.
Next, locate the drain plug underneath your car and place the drain pan underneath it. Using a wrench, loosen the plug and allow all of the old oil to drain out. Be careful not to over-tighten the plug when putting it back in; just hand tighten it until it’s snug.
Finally, add fresh oil to your engine using the funnel. Make sure not to overfill it; check your owner’s manual for guidance on how much oil your car needs.
Once you’re finished, start the engine and check for leaks. If everything looks good, you’ve successfully changed your own oil!
FAQs
Is It Safe to Drive with the Check Engine Light On?
Many people worry that it is unsafe to drive with the check engine light on. However, in most cases, it is safe to continue driving your vehicle. If your check engine light is on, it means that your vehicle’s on-board computer has detected an issue with the emissions system. The check engine light will usually come on if the gas cap is not tightened properly, or if there is an issue with the oxygen sensor. In most cases, these issues can be fixed easily and will not cause any damage to your vehicle. If you are concerned about driving with the check engine light on, you can always take your car to a mechanic to have it checked out.
Is It Normal For Check Engine Light To Come On After Oil Change?
Check engine lights can come on for a variety of reasons. Sometimes it is something as simple as a loose gas cap, while other times it may indicate a more serious issue with your vehicle. If you have recently changed your oil and the check engine light has come on, it is possible that there is an issue with your oil filter or oil level. It is important to check these things first before taking your car to a mechanic. If you are unsure of what to do, it is always best to consult with a professional to get an accurate diagnosis.
How Do I Turn Off The Check Engine Light After An Oil Change?
First, check your oil level and make sure that you have enough oil in the engine. If the check engine light is still on after adding oil, then you will need to take your car to a mechanic to have it checked out. The check engine light may be indicating a more serious problem with your car’s engine. Do not ignore the check engine light if it comes on after an oil change.
Can Oil Cause A Check Engine Light?
If you’ve recently changed your oil and notice that your check engine light has come on, it’s possible that the two are related. While it’s unlikely that the oil change itself is responsible for triggering the check engine light, there are a few ways that this could happen.
One possibility is that the oil filter was not properly installed during the change. If the filter isn’t seated correctly, it can cause an oil leak. This in turn can trigger the check engine light as well as cause other problems with your vehicle.
Another possibility is that the wrong type of oil was used. Using the wrong oil can clog up your engine and cause all sorts of problems, including triggering the check engine light. Be sure to always use the type of oil recommended by your vehicle’s manufacturer.
How Long After An Oil Change Does The Check Engine Light Go Off?
After you’ve had your oil changed, it’s not unusual for the check engine light to come on. This is usually due to a sensor that needs to be reset. The check engine light should go off after a few days of driving. If it doesn’t, there may be another problem with your car.
Why Is My Check Engine Light Still On After Oil Change?
If your check engine light is still on after you’ve changed your oil, it’s possible that there’s an issue with your vehicle’s oil level, quality, or filtration system. It’s also possible that the check engine light is unrelated to the oil change and indicates a separate problem with your vehicle. If you’re concerned about the check engine light, contact a qualified mechanic for diagnosis and repair.
How to prevent the check engine light from coming on after an oil change?
If you’re noticing that the check engine light is coming on after you’ve had your oil changed, there are a few things you can check. Make sure that the oil change was done correctly and that the right amount and type of oil was used. You can also check the oil level yourself and top it off if necessary. If the check engine light is still coming on, it’s possible that there’s an issue with the sensor or another component of the engine, so it’s best to take it to a mechanic to have it checked out.
Can needing an oil change cause a check engine light?
Yes, if your check engine light is on after an oil change, it could be due to a loose or improperly installed oil filter. Check your oil filter to make sure it is properly secured. If the check engine light is still on after you fix the oil filter, take your car to a mechanic to have it checked out.
Can too much oil cause check engine light?
If you’ve recently changed your oil and notice that your check engine light has come on, it’s possible that you’ve added too much oil to your engine. While it’s not harmful to have a little bit of extra oil, too much can cause problems.
If the check engine light is accompanied by any other strange symptoms like reduced power or poor performance, it’s best to take your car to a mechanic to have it checked out. However, if the check engine light is the only issue, then you may be able to fix the problem by simply draining some of the excess oil from your engine.
Conclusion
Check engine light after oil change. We hope this article was helpful in explaining what the check engine light means after an oil change. If you have any questions or concerns, please do not hesitate to contact our team. We would be happy to help you troubleshoot and fix your car! Thanks for choosing our shop for all of your automotive needs.
Read more: