Table of Contents
You will need a brake fluid change when you perform a car service. The price varies from car to car and model. So how much does a BMW brake fluid change cost?
A BMW brake fluid change costs between $150 and $360, depending on the shop and the mechanics doing the work for you. BMW dealers charge between $129 and $149 for the same thing.
However, you can find cheaper services in the right places for this job. Changing a BWM brake fluid has a couple of checks that we will look at in this article.
What to Expect after the Process
BMW Brakes A BMW brake fluid change includes checking the tire pressure of all wheels, changing the air filter, and replacing the brake fluid. Some dealerships also clean and change the coolant in the engine and driveline.
Most car owners find changing brake fluid an easy task. It is very easy to get it wrong and cause accidents and damage to your car if not done correctly. Here’s how to change your brake fluid if you’d rather do it yourself.
How to Change the Brake Fluid in a BMW
Before you change the brake fluid, here are some things you’ll need to do it successfully:
- All the tools needed to work
- Be in a clean environment if possible
- Wear protective gear: gloves, an apron, and boots
Raise the car off the ground and remove the covers from all wheels. Remove the jacking kit and remember to use a jack stand for added safety when under the car.
Open the hood and find the master cylinder, usually on the side of the engine compartment. The position of the master cylinder may differ depending on the car model.
Remove the reservoir cap and place it in a safe place. Remove the bolts holding the master cylinder to the engine and lift it out of its mounting position with one hand.
Remove the brake fluid reservoir cap and loosen a bleed screw. You should notice a bleed screw or bleed port. If the screw is unplugged, drain the old brake fluid into a clear jar. Insert the fluid into the purge port.
BMW master cylinders have three ports. Make sure you have flushed all fluid from all three bleed ports and tighten the screws securely. After bleeding all the fluid, reinstall the reservoir cap and master cylinder to their original position.
Fill your reservoir with brake fluid according to the required specifications (capacity and type of fluid). Then, drain the new brake fluid into a bottle and use it to pour into the master cylinder reservoir.
Tighten the cap on your master cylinder securely. Check under your vehicle for leaks before lowering it. Lower your car slowly and carefully to the ground and remove the jacking equipment, usually a jack stand. If you have one, raise the car to its original position using the engine crank.
How to know you need to change your brake fluid
Don’t wait for your brake to stop working completely to know that you need a brake fluid change. There are safer ways to know when to change your brake fluid.
Illuminated ABS Light ABS
stands for Anti-Lock Brake System. When the light is very bright, it is a sign that there is a problem with the brake system. The most popular reason is to change the brake fluid or add more. Consult professional mechanics for an accurate result.
Problems with your brake pedals
The brake pedal becomes hard to press when the brake fluid leaks or gets old: enough of a sign that your brake fluid requires replacement. Alternatively, when the pedals become too soft to press, you need a brake fluid change. Any ignorance can lead to serious problems with your brake system.
Burnt smell Overheated brakes produce a very unpleasant chemical smell. When you notice this, stop immediately and allow the brakes to cool to avoid damaging the wheel and the braking system.
Defective brake pads Brake pads can stop working properly when the brake fluid becomes dirty.
As a result, you may notice strange sounds like screeching or screeching coming from the brakes. Also, your brakes may take a little longer to stop the car.
Is a BMW brake flush necessary?
Yes! Your BMW needs a brake flush. Over time, small bits of debris find their way into your brake fluid, which can cause problems and hinder your stopping power. In addition to debris, moisture can enter the system and cause oxidation, which creates more debris in the brake fluid. When your braking system is compromised, your vehicle will not be able to stop as quickly as it should. This, of course, is very dangerous and must be avoided.
How often should the brake fluid be changed in a BMW?
Every 2 Years
The general rule of thumb is to change your brake fluid every 2 years (or 30,000 miles). Even if your BMW is sitting in a garage and not being driven, moisture can get into the brake fluid, which can lead to brake failure.
4 Signs You Need Know
- Brake Flush Your ABS (Anti-Lock Brake System) Light Is On – If you see this light come on, it’s time to add or replace your car’s brake fluid.
- Your brake pedal feels different – If you find it harder to depress the brake pedal, or if the brake pedal feels ‘soft’, you probably need new, clean fluid.
- Noisy brakes – If you don’t have enough fluid in your brake system (or it’s old), you may hear some noise coming from your brakes. Low or dirty fluid can also cause your brake pads to make a screeching or screeching sound.
- Burning smell: If you notice a chemical odor after braking hard, your brakes may be overheating. You must stop immediately and wait for the brakes to cool before continuing to drive. If the brake fluid gets too hot, the brakes could fail.
What happens if I don’t replace my brake fluid?
Failure to change your brake fluid as recommended by your vehicle manufacturer will lead to moisture contamination in the brake reservoir where the brake fluid is stored.
As brake fluid ages it is also likely to become contaminated with ‘debris buildup’. The various seals and hoses that make up your brake system can shed small amounts of rubber as they age. Moisture laden brake fluid can also cause metal components to rust and corrode, resulting in rust particles being found in the brake fluid.
When you don’t change your brake fluid, your car’s braking ability suffers greatly, leading to poor braking performance. In most cases, you can tell just by pressing the brake pedal: if it feels incredibly spongy, there’s a good chance your brake fluid is almost gone. You may notice that it takes more effort and time to stop your vehicle, and in some cases, you may even have to pump your brakes just to build up enough pressure for a safe stop.
There’s also the dangerous possibility of your brakes failing entirely, which is an unsettling prospect if you’re traveling at any speed. This can happen if the brake fluid manages to reach its boiling point during operation, especially if that boiling point was artificially lowered due to moisture contamination.
Frequently Asked Questions
Should I replace the brake fluid if I have to change my brake pads and discs?
The brake fluid should be changed every time the brake pads are changed, every time the brake discs and pads are changed, every 2 years or when the boiling point of the Brake Fluid is below 165°C (DOT 4)
Can I top up the brake fluid?
Brake fluid should never be topped up as its properties are reduced if new is mixed with old. Many vehicles also measure pad or disc wear by the brake fluid level. and if it is recharged, the vehicle will not report this wear.
How often should I replace my brake fluid?
Most manufacturers recommend that you change your brake fluid every 24 months or 24,000 miles, whichever comes first (check your vehicle manual for details). First Stop will check your brake fluid to see if it needs to be replaced. If necessary, they will drain the old fluid and then refill it with new brake fluid to the correct specifications.
How does water get into brake fluid?
Moisture comes from the atmosphere. Brake fluid is designed to absorb water rather than the water forming a water pocket in the brake system. Regions with high humidity (such as East Texas) will contaminate brake fluid much faster than the dry deserts of Arizona.
How to tell if your brake fluid need flushing
to be flushed New brake fluid is usually clear or has a slight yellow tinge. Any dark or muddy discoloration is long overdue. Dark discoloration will consist of abrasives that will accelerate wear on brake system components. Resulting in leaks and system failures. Each of our technicians has an electronic test probe that instantly measures moisture content simply by probing the surface of the fluid.
Line Brake fluid plays a crucial role in your car’s brake system, helping to move various parts of your vehicle’s brake system when the driver presses the brake pedal to apply the brakes and slow the car down. speed or stop.
Brake fluid runs at high temperatures and without it your vehicle would not be able to stop when you press the brake pedal.
The brake fluid in your vehicle serves as a lubricant for all moving parts and prevents corrosion. It has to be compatible with the rubber seals and hoses, allowing the brake system to achieve optimal performance and long service.
When you need to change the brake fluid in your BMW, involve a professional mechanic or visit any BMW dealer for the best prices on this service. Also, make sure you get the correct fluid according to the manufacturer’s specifications.
We hope the article about BMW brake fluid change cost and the related information is helpful to you. If you have any questions, please let us one on our website Auto Oil And Fluid!